Nebulink User Manual

Download the PDF manualVersion 2.2.141, with pictures, for printing or reading offline.

Welcome

Nebulink runs on your Windows PC and controls your ZWO Seestar smart telescopes over your home Wi-Fi. It finds your scopes on the network by itself, builds a whole night's plan for you in five steps with Nebulink Whiz, picks the best targets for each night from the forecast and the Moon (including comets, the planets and the Moon), shows live status and sky conditions, points the scope from a star chart, runs a whole night's imaging plan unattended, and gathers your pictures in one album.

Take the tutorial. Click Tutorial near the bottom of the page list for a guided walk through Nebulink: it highlights one part of a page at a time and explains it, in about 20 short steps. It only opens pages; it never moves your scope. Use Next and Back (or the arrow keys), and Esc or Skip tutorial to stop.

Watch the how-to videos. How-to videos in the page list shows the short how-to series from the Nebulink YouTube channel; click one to play it inside Nebulink (it needs an internet connection). On most pages, the red ▶ button at the top opens the video for that page, starting at the part about it, and the Map your horizon box in Live view has its own ▶ Watch how. New videos appear in the list by themselves when they're posted.

New to Nebulink? Open Quick start at the top of the page list (it opens by itself the first time) and press Show me something amazing: Nebulink picks the best target in the sky and images it for you. To plan a whole night, open Nebulink Whiz under Plan the night: it picks a night, chooses targets, orders them and starts the plan for you.

Nebulink works with the Seestar S50, S50 Pro, S30 and S30 Pro, and you can connect several scopes at once. It is an independent product and isn't made by ZWO.

What you need

What's new in 2.2

New in 2.2.143

New in 2.2.142

New in 2.2.141

New in 2.2.139

New in 2.2.138

New in 2.2.137

New in 2.2.136

New in 2.2.135

New in 2.2.134

New in 2.2.133

New in 2.2.132

New in 2.2.131

New in 2.2.130

New in 2.2.129

New in 2.2.128

New in 2.2.127

New in 2.2.126

New in 2.2.125

New in 2.2.124

New in 2.2.122

New in 2.2.121

New in 2.2.120

New in 2.2.119

New in 2.2.118

New in 2.2.117

New in 2.2.116

New in 2.2.115

New in 2.2.114

New in 2.2.113

New in 2.2.109

New in 2.2.108

New in 2.2.107

New in 2.2.106

New in 2.2.105

New in 2.2.104

New in 2.2.103

New in 2.2.102

New in 2.2.99

New in 2.2.98

New in 2.2.88

New in 2.2.87

New in 2.2.86

New in 2.2.85

New in 2.2.84

New in 2.2.83

New in 2.2.82

New in 2.2.81

New in 2.2.80

New in 2.2.79

New in 2.2.78

New in 2.2.77

New in 2.2.76

New in 2.2.75

New in 2.2.74

New in 2.2.73

New in 2.2.72

New in 2.2.71

New in 2.2.70

New in 2.2.69

New in 2.2.68

New in 2.2.67

New in 2.2.66

New in 2.2.65

New in 2.2.64

New in 2.2.63

New in 2.2.62

New in 2.2.61

New in 2.2.60

New in 2.2.59

New in 2.2.58

New in 2.2.57

New in 2.2.56

New in 2.2.55

New in 2.2.54

New in 2.2.53

New in 2.2.52

New in 2.2.51

New in 2.2.50

New in 2.2.49

New in 2.2.48

New in 2.2.47

New in 2.2.46

New in 2.2.45

New in 2.2.43

New in 2.2.42

New in 2.2.41

New in 2.2.40

New in 2.2.39

New in 2.2.38

New in 2.2.37

New in 2.2.36

Fixes in 2.2.36

New in 2.2.20

New in 2.2.19

New in 2.2.18

New in 2.2.17

New in 2.2.16

New in 2.2.15

New in 2.2.14

New in 2.2.13

New in 2.2.12

New in 2.2.11

New in 2.2.10

New in 2.2.9

New in 2.2.8

New in 2.2.7

New in 2.2.6

New in 2.2.5

New in 2.2.4

New in 2.2.3

New and fixed in 2.2.2

Fixed in 2.2.1

Earlier, in 2.1.1

Earlier, in 2.1.0

Earlier, in 2.0.1

Earlier, in 1.4.4

Earlier, in 1.4.3

Installation and first run

Setup takes a few minutes and is done once.

  1. Double-click Nebulink-Setup.exe. If Windows shows Windows protected your PC, click More info, then Run anyway.
  2. Click through the installer. Tick Create a desktop shortcut if you'd like one, and leave Start Nebulink now ticked at the end.
  3. Nebulink opens in your web browser at http://127.0.0.1:8050. There's no separate window: the page is the app.
  4. Connect Nebulink to your Seestar. The first time, a card at the top of the Overview page asks for the official Seestar Android app file (an .apk or .xapk; you don't need an Android phone). Seestar firmware only takes commands from apps that hold ZWO's connection key, and Nebulink reads that key from this file, on your PC. Get it from ZWO's Seestar app download page (the Google Drive download next to the Seestar Android app, then Download in Google Drive), press Choose the Seestar app file, and pick it. The key is saved to C:\Users\<you>\.seestarpy\seestar.pem; keep it private.
  5. Close the Seestar app on your phone. Nebulink searches your network and adds every Seestar it finds, and remembers them for next time.

Starting and quitting. Open Nebulink from the Start menu or the desktop icon. To close it, press the power icon at the top right, beside Night mode, or Quit Nebulink at the bottom of the page list; closing the browser tab alone leaves it running in the background (which is what lets a plan run overnight). Opening Nebulink while it's already running just brings the page back.

Try it without a telescope: open Nebulink (demo mode) from the Start menu to explore every page with simulated scopes.

Where your files go. Photos and videos you save are in your Pictures\Nebulink folder. Settings (saved scopes, places, plans) are in %LOCALAPPDATA%\Nebulink, along with nebulink.log, which is useful if something goes wrong. Both stay if you uninstall.

Trial and license

Nebulink runs free, with every feature, for 14 days from the first time you open it. The badge in the header shows the days left. Demo mode is always free.

Activating. After buying, press the header badge (or Enter license key on the About page), paste the key from your purchase email and press Activate. Nebulink checks it online once; after that it works offline, rechecking about once a day when the PC is online. It keeps working for 30 days without internet, so nights at a dark-sky site are fine.

Three PCs per key. Each key can be active on three computers. Moving to a new PC? On the old one, open About and press Deactivate this PC to free its place.

Updates. Your purchase includes updates for life; the About page shows Updates until: Lifetime. There is no yearly fee. If you have an older renewal key, you do not need it.

Updating and uninstalling. To update, run the new Setup file; it replaces the old version and keeps your settings. If a Nebulink page was already open in your browser, a banner at the top says Nebulink has been updated: press Reload now to see the new version. To uninstall, use Windows Settings → Apps → Installed apps → Nebulink → Uninstall.

Running from the source files (advanced). With Python 3.9 or later: unzip nebulink.zip, run pip install seestarpy opencv-python numpy pysmb in that folder, then python app.py. Add addresses to skip the search (python app.py 192.168.1.85) or --demo for simulated scopes. Saved photos then go to the captures folder next to app.py.

Finding your Seestars

The Find my Seestars button is on the Overview page, inside the My telescope card, below the Firmware, System, CPU temp and Wi-Fi boxes. Use it to add a new scope, or to find one whose address has changed.

The scope's temperatures. The CPU temp box shows the temperature of the Seestar's processor, and under it the temperature of its battery. Both are inside the scope and run warmer than the air, often by 10 °F (5 °C) or more, so neither is the outside temperature. The status bar's Temp shows the outside air from the forecast first, then scope CPU. The battery temperature matters on cold nights: a Seestar's battery doesn't charge below 0 °C (32 °F).

Press Find my Seestars. Nebulink searches the PC's network for a few seconds and lists every scope it finds, with its model and address; press Add next to the one you want. If a scope's address has changed since last time, the list says where it used to be, and adding it replaces the old entry. If the search can't find a scope you know is on, open Or type its address, enter the address from the Seestar app or your router, and press Connect.

Setting the scope's location. The Seestar needs to know where it is to find targets and track the sky, and Nebulink uses the same spot for tonight's targets, darkness times and the forecast. The My telescope card shows the location the scope has. The Seestar app sets it from your phone's GPS; to set it from your PC instead (for example at a dark site without your phone), press 📍 Set location. Choose Use this PC's location, one of your saved places, a town or dark-sky site you search for, or type the latitude and longitude (west and south are negative: Hazleton is 40.96, -75.97). Press Set location; Nebulink reads the location back from the scope and shows a tick once it has changed. It can't be changed while the scope is stacking or running a plan, and Nebulink asks first if the new spot is far from the old one.

Planning without a Seestar. With no Seestar connected, 📍 Set location sets the place Nebulink plans for instead: pick this PC's location, a town or the numbers, and press Set location. It's saved on this PC, and Best targets, Nebulink Whiz, the Planner, the Star chart and the Weather page all use it, so you can plan a night before you set up. Under the scope's card it reads Planning for …. When a Seestar is connected, its own location is used; set it again then to send the place to the scope. If a Seestar doesn't answer, the place is still saved for planning. A scope you've added before but that's switched off now is planned with what it last reported: its model, field of view and mount mode (EQ or Alt-Az). The Planner's framing note says so, with the date, and the scope's button at the top of each page says offline (before, it could say connecting… for as long as the scope stayed off).

Your places. Save the spots you image from so you never type them again. When you pick a new place in 📍 Set location (this PC's location, a search result or typed numbers), tick Save to my places as and give it a name, such as Home or Beach. Next time it's at the top of the window under Your places: tap it, then press Set location. Press × next to a place to remove it. These are the same places as on the Weather page, up to 50, and they're kept in your backup.

Removing an old scope. Every scope button at the top of the My telescope card has a small × next to it. Press it and confirm to remove that scope from Nebulink. A scope Nebulink can't reach shows offline on its button; when it's selected you can also press Forget this scope. Nothing on the scope itself changes, and you can add it again with Find my Seestars.

A scope with a new address. If your router gives a Seestar a new address, add it again with Find my Seestars. When the old address has gone quiet, Nebulink drops the old entry, even during a plan, and moves its target list to the new address; press Start on the Planner to run it again. If the old address still answers, both are kept.

Each scope you add is remembered, so Nebulink connects to it every time it starts. The search works when the PC and the scope are on the same home network, and also when the PC is joined to the scope's own Wi-Fi hotspot. Windows may ask whether Python can use the network the first time; allow it on private networks.

Quick start

Beginner view. With Beginner on (the switch under the scope boxes), Quick start is laid out for a first night: a status line for your Seestar (ready, imaging or offline), four big buttons, and tonight's top three below them. See tonight's best scrolls down to the three; Pick something to look at opens Best targets; Check my telescope opens the Overview with your Seestar; Stop appears only while something is imaging. The tiles, steps and sky line are hidden in Beginner and show in Advanced.

Quick start, at the top of the page list, is the quickest way to a first picture. Nebulink opens it by itself the first time it starts; after that it's one click away.

Quick start: four tiles check the scope, darkness, cloud and dew; the big button images tonight's best target.
Quick start: four tiles check the scope, darkness, cloud and dew; the big button images tonight's best target.

Nebulink Whiz

Nebulink Whiz builds a whole night's plan in five short steps. Open it from Nebulink Whiz at the top of Plan the night.

Nebulink Whiz, step 3: the targets it picked for tonight, with the time each one gets.
Nebulink Whiz, step 3: the targets it picked for tonight, with the time each one gets.
  1. Night. Pick the night (each one shows its cloud forecast; Whiz suggests the clearest, darkest one), which Seestar to use, and how long it can run: until a bedtime you choose, half the night, or all night until dawn. Under How long can it run?, Exposure per frame sets how long each frame is (10 to 30 s in Alt-Az; up to 60 s in EQ mode).
  2. Interests. Choose the kinds of targets you like (galaxies, nebulae, planetary nebulae, star clusters, comets), whether to stick to famous showpieces, and how to fill the night: fewer targets with long exposures, a balanced mix, or a quick tour of many.
  3. Targets. Whiz ticks the best mix for your time and shares the hours out between them. Untick or add targets, change the minutes, or press Details for a target's picture and height chart. The bar shows how much of the night is used and suggests a target for any spare time.
  4. Timeline. Whiz puts each target where it's highest in the sky and checks every slot: too low, past your end time, or close to a bright Moon. Turn off automatic order to arrange them yourself with the arrows.
  5. Ready. A checklist (scope connected, battery, storage, phone app closed) with a Dew heater switch: turn the heater on or off and set its power right there, before the plan starts (the same setting as the Overview's Dew heater row). Then choose to start automatically when it gets dark, start right now, or just save the plan to the Planner. If the Planner already has targets, Whiz asks before replacing them.

A plan scheduled for a later night waits until then, so keep the PC on and Nebulink open. You can still change anything on the Planner page afterwards (stop the waiting plan first).

Getting around

Every page shares the same frame: the header and status bar across the top, the page list on the left, and the copyright line at the bottom.

Banners. While any scope is imaging, or getting ready with a GoTo, plate solve and focus, a blue banner under the header scrolls what each scope is doing: its target, frames and time, and how long it stays dark. Watch it build → opens Stacking. When something goes wrong, a red banner flashes above it with the scope's name, what happened and what to do, and a button to the page that fixes it; amber is for a note that sorts itself out (clouds pausing the plan, a stack that ended early). Press ✕ to dismiss one; starting the plan again clears that scope's, and "Seestar not answering" goes by itself when the scope answers again. Hover over a banner to stop it scrolling. If Windows is set to reduce animation, the banners stay still and the red one doesn't flash. The banners show whether or not phone alerts are switched on.

Messages from Nebulink's developer. Now and then a short message from Paul may appear at the top of the app: a tip, news or a reminder to update. Press Got it and that message won't show again. It comes from the same small public file Nebulink reads to check for updates, and nothing about you or your PC is sent.

What the scopes are doing, on every page. While a scope is imaging, a red box with a pulsing dot sits above the page list: Imaging M 31, with the frame count and how long it has stacked (one box per scope). An amber box means a GoTo, plate solve or focus is under way, and a blue one that a plan is waiting to start. Click a box to switch to that scope and watch it. On a narrow window the boxes sit at the bottom left. The browser tab's title shows it too (● M 31 · 42 · Nebulink), so you can see it with Nebulink in the background, and the status bar's Activity turns red while stacking.

Neon scope buttons. In the classic look (not in night mode) the scope buttons above the page list are lit like neon signs: green while the scope is connected (idle, imaging, on a GoTo or with a plan waiting) and red while it's offline.

Header. Shows a greeting, when full darkness starts or ends tonight, the time, the language list (English, Deutsch, Français, Español, 中文, Italiano, 日本語, Русский, Nederlands, Polski, Norsk and Svenska) and three buttons: 🎨 (background), °F/°C (temperature unit) and Night mode. Nebulink starts in your PC's language when it's one of those, and remembers the one you pick. Pages, buttons, messages, dates and this manual all switch. Night mode turns the whole app dim red so your eyes stay adapted to the dark; press it again to switch back.

Theme. Press 🎨 and pick a Theme to change the look of every page: Nebulink (the original), Bridge console (navy and amber with a terminal font), Mission control (graph paper and instrument green, the easiest to read in daylight) Holo deck (glowing outlines on black), Command bunker (olive and gunmetal with amber lights), Relic (dark stone and bronze with glowing symbols), Deep field (black with tiny stars and thin gold lines), Flight deck (steel gray with hazard stripes), Fleet ops (brushed gunmetal with red status lights) or Night watch (charcoal with dim green readouts, gentle on the eyes without going fully red). It shows straight away and is remembered. Night mode always switches to dim red, whatever the theme; press it again and your theme comes back. Back to the original returns to the Nebulink theme.

Two looks. Press the paint button and choose a look. Nebulink, the classic look, has the page list on the left, and new installs open with it. Nebula has a floating menu at the top (Home, Tonight, Targets, Live, Album and More) and glass panels; the full list of pages is behind More.

Menu colors. In the classic look each section of the page list has its own color: pearl white for Quick start and Overview, violet for Plan the night, green for At the scope, orange for After and coral for Help. The open page lights up in its section's color. Night mode keeps everything red.

Press 🎨 to pick a theme and a background.
Press 🎨 to pick a theme and a background.

Background. Press 🎨 to change what's behind the pages (every theme except Nebulink and Holo deck has its own). Pick one of six backgrounds (Nebula, Deep space, Midnight blue, Aurora, Dusk or Pure black), choose Your colors and set a top and bottom color, or choose Your picture to use one of your own photos (JPEG, PNG or WebP; large photos are shrunk to screen size). For a picture, Darken keeps the text easy to read and Soften blurs it. Twinkling stars turns the star layer on or off. Changes show straight away and are remembered; Back to the original restores the Nebula background. Night mode always uses plain dark red, whatever you've picked.

Status bar. Always shows the selected scope at a glance:

The status bar, on every page: the scope, what it's doing, tracking, filter, temperature, battery and location.
The status bar, on every page: the scope, what it's doing, tracking, filter, temperature, battery and location.
ItemWhat it tells you
SeestarThe model, such as S50 Pro
ConnectionGreen dot = connected, red = unreachable, plus its address
Wi-FiThe scope's Wi-Fi signal, as bars and in dBm: four or three green bars from −60 dBm up (good), two amber from −70 (fair), one orange below that (weak) and one red below −80 (very weak). With a weak signal the live video freezes and commands time out; move the scope or the router closer. Point at it for advice, or click it to see the last hour on the Overview. The same bars show beside each scope at the top of the menu.
ActivityStacking, GoTo, Slewing, Focusing, Live preview, Parked or Idle, and the target. Live preview means the camera is running but the scope isn't imaging anything.
ModeWhether the Seestar is in Alt-Az mode (an icon of two crossing axes) or equatorial (EQ) mode (a tilted axis through a ring), the same as Mode on the Alignment page. Click it to open the Alignment page. It shows — until the scope has said which. Hidden in Beginner.
LevelWhether the Seestar's base is level, by the same rules as the Level dial on the Alignment page: a spirit-level icon in green (Fine, within 1° of level), amber (Almost, within 3°) or red (Tilted). In EQ mode it checks the wedge's tilt against your latitude instead: green within 2°, amber within 5°, red Check wedge. It doesn't measure polar alignment. Click it to open the Alignment page. It updates about every 30 seconds (every second while the Alignment page is open) and shows — until the scope sends a reading. Shown in Beginner too.
TrackingWhether the mount is following the sky
FilterIR-cut or LP
TempOutside air temperature and the scope's own temperature, in °F or °C (the °F/°C button beside Night mode switches every temperature in Nebulink)
BatteryCharge level, and whether it's charging
LocationWhere the scope thinks it is: the name of a saved place within 3 km, otherwise the nearest town (looked up online), or the coordinates when the PC is offline. Hover to see the coordinates; click to change the location.
GMTThe time in GMT (UTC), the time astronomers log observations in. When it's already the next day in GMT, the day is shown in front of the time, and the tooltip gives the date.

Four buttons sit at the right of the status bar, on every page.

Stop, Stop imaging, Close arm and the move arrows go straight to the scope over its own connection, so they work at once even while the other scope is answering slowly.

On a phone the status bar folds to one line: the Seestar, what it's doing and its battery, with Stop beside it while something can be stopped. Tap the line to see everything and all four buttons; Nebulink remembers whether you left it open.

Pages. The page list follows a night out. Overview sits at the top. Plan the night holds Nebulink Whiz, Best targets, Weather, Star chart and Planner. At the scope holds Live view, Alignment and Stacking. After holds the Album and Analytics. Manual and About sit at the bottom. If you have more than one scope, pick which one you're working with on the Overview page, or with the Seestar switcher at the top of Nebulink Whiz, Planner, Live view, Stacking and Album. Each button there shows the scope's status (for example stacking M 31 · 83). Every page follows that choice.

Beginner and Advanced. The switch under the scope boxes on the left sets how much Nebulink shows. Beginner keeps the essentials for planning a night, imaging and looking at your pictures: the Star chart, Live view, Alignment, Analytics, Moon, Planets and Planet stacker pages, Quick start (the first launch opens the Overview instead), the Help and settings links (under one button), the status bar's arm, reboot and power buttons, the more technical rows on the Overview, and its Sun & Moon, Seestar storage and log cards are hidden, and a note at the bottom of the page list says so. Advanced shows every page and every setting. Nothing is switched off in Beginner: plans, alerts and everything else keep working, and you can switch back at any time. New users start in Beginner; if you used Nebulink before this version, it starts in Advanced.

Switching from the status bar. The Beginner mode or Advanced mode button in the status bar switches to the other mode when you click it. Right-click it (or press and hold on a touch screen) for a short explanation of each mode, with buttons to choose one.

The ☰ menu. In the Nebula look on a computer, the ☰ button at the top left opens the full list of pages, with Help and Settings: the same list as More. The Classic look keeps its menu on the left, so it has no ☰ button. On a phone, use ☰ Pages as before.

Overview

The Overview page answers "how is the scope doing, and how is tonight looking?" on one screen. It refreshes every couple of seconds.

In Beginner, the Overview shows only the telescope you've selected and opens with Start here, three steps: Connect your Seestar scrolls to My telescope, Choose tonight's target opens Best targets, and Start the session opens the Planner. The setup checklist is hidden on this page in both views.

The Overview: your telescope, the current target and the live stack.
The Overview: your telescope, the current target and the live stack.
CardWhat it shows
My telescopeModel, online status, battery, firmware, temperature and Wi-Fi signal. Buttons switch between scopes. Find my Seestars searches the network for scopes to add (see Finding your Seestars).
Current targetA sky survey photo of the target the scope is working on, zoomed to fit the selected scope, with a box showing its field of view (an S30 Pro sees a much wider patch of sky than an S50 Pro), plus exposure progress, tracking, filter and mode. It changes as soon as you pick another scope. When the scope isn't imaging (idle, parked, or only running its live preview) it says Not imaging and names the last target.
Live stackThe stacked picture as it builds, updated as each new frame is stacked, with frames accepted and rejected, total exposure time, Auto DBE and autofocus.
Your nightThe six best showpiece targets from your location tonight, ranked by hours above 30° in full darkness. The one you're imaging is highlighted. See all targets and the week ahead opens the Best targets page.
ConditionsAn hour-by-hour cloud chart from 6 pm to 6 am, the best clear window, temperature, wind, humidity and dew risk, and the Dew heater switch (see below).
Sun & MoonWhen astronomical darkness starts and ends, the moon's phase, and moonrise and moonset.
StorageFree space on the scope. When it's getting full, copy pictures to this PC and delete them from the Seestar with Select and Copy to PC in the Album.
Live eventsThe scope's own status messages; click the heading to expand.

The forecast and sky photos need internet on the PC. Press the refresh button on the Conditions card to reload the forecast. For the full forecast and the week ahead, open the Weather page.

Dew heater. The Dew heater row in the Conditions card shows whether the selected scope's heater is on, with a Turn on / Turn off button. While it's on, Heater power sets its strength from 10% to 100%; Nebulink remembers the power for each scope. When tonight's dew risk is high and the heater is off, a note suggests turning it on. The heater uses more battery. It's the same setting as the Seestar app's, so both show the same state.

Dew control. Under the heater switch, tick Dew control: switch the heater on and off by itself and Nebulink looks after the heater all night: it turns it on when the air gets within 3 °C of its dew point and off when it's more than 5 °C above it, checking every 5 minutes, using the forecast for the scope's place (the Seestar has no humidity sensor). Each change is listed under Recent changes and in the scope's activity. If you switch the heater yourself, here or in the Seestar app, dew control steps aside until the next afternoon and says so. It turns the heater off when the scope runs on a battery below 20%. It works only while Nebulink is running and the scope answers: if the PC sleeps, Nebulink is closed or the Wi-Fi drops, the Seestar keeps the heater as it was last set. Without a forecast (offline), it leaves the heater as it is.

Sounds and lights. Below the dew heater, Beeps sets how loud the Seestar beeps (Off, Quiet or Loud, the same choices as in the Seestar app), and Status light turns its light off or on (on Seestars whose firmware lets apps set it, firmware 9 or later). For a star party, 🌙 Quiet and dark turns both off at once; press it again and they go back to how they were, even if Nebulink was closed in between.

Start stacking. Under the stacked picture, ▶ Start stacking starts live stacking on the target the scope is pointed at, the same as Start live stacking on the Stacking page. While it stacks, the button reads ■ Stop stacking; the frames so far are kept. If the scope isn't pointed at a target yet, use GoTo from Best targets or the Star chart first.

Best targets

Pictures that don't load. A card whose sky picture can't be fetched shows a blank with a Retry picture button. Above the grid, Refresh pictures asks again for every blank card, and Clear sky-picture cache deletes the pictures saved on this PC so they're fetched again. When a picture source is down, a line above the grid says which one, for example "Pictures: CDS down, using STScI". The Connection page's Sky picture sources panel shows each source's last result.

Download all pictures. Each card's sky picture is fetched from the sky surveys the first time it's shown, then kept on this PC. To get them all at once, press ⬇ Download all pictures on Best targets: Nebulink fetches the picture of every target on the list in the background, three at a time, and shows how far it has got. You can leave the page while it works, and Stop ends it. Pictures already on this PC are skipped. After that the cards load straight from this PC. If the sky surveys aren't answering, it stops by itself; try again later.

Choosing the sky-picture server. On the Connection page, Sky picture sources lets you choose which CDS server to ask first: the main one or its backup. Both send the same pictures, and if the one you chose doesn't answer, the other is tried. Test now shows which servers are answering.

The Best targets page (under Plan the night) ranks about 1,600 deep-sky targets for the night ahead (every Messier object, the brighter NGC and IC galaxies, nebulae and clusters, the Sharpless nebulae, and named dark and reflection nebulae), so you know what's worth imaging before you set up. Use the category buttons (Messier, Comets, Planets, Galaxies, Nebulae, Planetary nebulae, Open clusters, Globular clusters) to narrow the list; each shows how many are up that night. The best 12 show first; press Show more to keep going down the list, or type a name in Find a target. Famous showpieces rank a little ahead of fainter, lesser-known objects.

Best targets: every target ranked for tonight's sky, with how long it's up and its height.
Best targets: every target ranked for tonight's sky, with how long it's up and its height.

Show on star chart. Every card (deep-sky targets, comets and planets) has Show on star chart, which opens the Star chart on that object with its details and the GoTo button. Press ✕ Close chart at the top right of the chart (or Esc) to come back to Best targets at the same place in the list.

Target details. Click a target's picture or name to open its details: a larger sky survey picture with your scope's field of view drawn on it, its magnitude, size, position, filter and suggested imaging time, and a chart of its height through the night. The chart shades twilight and full darkness, shows the Moon as a dashed line and the cloud forecast underneath, and marks the 30° imaging height and the Seestar's 15° limit. Hover over the chart (or tap it) to read the time, height, Moon and cloud at any moment. From there you can add it to the plan, frame it, or show it on the star chart. Press Esc or ✕ to close.

Comets. The Comets button lists comets forecast brighter than magnitude 13 that get above 30° in darkness that night. Nebulink downloads the Minor Planet Center's comet list (updated daily) when the PC is online, keeps a copy for nights without internet, and works out each comet's position and expected brightness. Each card shows how far the comet moves per hour. Comet brightness forecasts are often off by a magnitude or two, and comets move against the stars, so Nebulink suggests shorter stacks (30 minutes) and re-aims at the comet's current position when its turn in a plan comes.

Planets. This category shows when each planet is above 15° after dusk and how bright and how big it is, so you can plan a planetary night. The Moon is on its own page (under At the scope). Show on star chart finds it on the chart. Nebulink's GoTo and plans are made for deep-sky stacking, so photograph the Moon and planets with the Seestar app's Solar System mode. The Sun is never listed.

The score combines hours above 30° in darkness, how high the target climbs, the hourly cloud forecast and moonlight. Moonlight counts more against galaxies and clusters than against nebulae shot with the LP filter. The ranking is the same whichever Seestar you pick; each card just notes how the target fits the selected scope's field.

The page uses the location chosen on the Weather page, which follows your scope by default. When you take the scope somewhere new, the rankings follow it. Without an internet connection it still ranks targets, using darkness, height and moonlight only.

After dawn, Tonight means the coming night. Targets for other nights can't be added to the plan until that night, because the Planner runs tonight's queue.

When should I shoot it? In a target's details, 📅 When should I shoot it? looks a month ahead instead of only tonight. A bar for each of the next 30 nights shows the target's score, worked out the same way as Best targets: time above 30° (and your horizon) in full darkness, moonlight, and clouds for the nights the forecast reaches (about seven). Later nights are scored on the sky alone. Dots under the bars show the Moon's phase. The best nights are listed with their hours, the Moon and the forecast; click any bar to see that night. 📅 Add to calendar saves the night as a calendar file with a reminder 30 minutes before the target is high enough. Comets aren't included, because they move from night to night.

Tonight's sky sheet. Tonight's sky sheet, in the conditions strip, makes one picture of the night picked in the chips, for the place on the Weather page: the eight best deep-sky targets (no more than three of one kind) with when and where they're highest, the planets and the Moon, comets bright enough for a Seestar, darkness times, the Moon's phase, the forecast if there is one, and sky events in the next two weeks. Save picture saves it as a PNG in your Downloads folder, Copy picture copies it to paste into an email or a chat, and Print prints it on one landscape page.

Sky events. Sky events lists what's coming up in the next six weeks, worked out for your place: meteor showers (with their best rate under a dark sky and how bright the Moon will be), the Moon passing a planet, two planets close together, a planet passing a Messier object, new and full moons, and comets brighter than magnitude 10. Pairings are listed only when you can see them from your place in a dark or darkening sky, with the time, the direction and the height. A green Good for a Seestar tag marks the ones that fit in one Seestar picture, high enough to shoot; tick Only show the ones that make a good Seestar picture to see just those. Meteor showers are for your eyes: meteors are too quick and spread too widely for the Seestar's small field. 📅 saves an event as a calendar file with a reminder an hour before. When one that's good for a Seestar is less than a week away, a green note about it shows under the conditions strip.

Observing lists. Observing lists, in the conditions strip, shows the Messier (110) and Caldwell (109) lists with a bar for how many you've imaged. A target counts as imaged when a stacked picture of it is in a Seestar's album, or a night Nebulink ran finished it (the same history as the Analytics page). Each tile says when you imaged it, or how high it gets in darkness tonight (Up tonight at 30° or more, Low tonight at 15° to 30°), or that it's too far south or north to see from your place. The filters show All, Imaged, Not yet and Not yet, up tonight; click a tile and Add to tonight's plan puts it in the Planner queue.

Messier Marathon. The third tab plans the Marathon: all 110 Messier objects in one night, best around new moon in March or early April. Nebulink picks the darkest night in that season, works out the darkness (the Sun 12° down) and puts the objects in the order that catches each one before it sets. Choose the minutes for each object and the lowest height your horizon allows; the list shows the time and height of each, how many fit, and which are out of reach from your place that night. Save the list (CSV) keeps it for a spreadsheet or a printout; on the night itself, Make it tonight's plan replaces the Planner queue with the Marathon (each object gets the minutes you chose, less about 3 for the GoTo and focus).

Satellite passes. Satellite passes, in the conditions strip, lists the visible passes of the space stations (the ISS and China's Tiangong) for the next five nights, and other bright satellites passing 40° or more above the horizon in the next 14 hours: when each appears, how high it climbs and in which direction, and whether it fades into the Earth's shadow before it sets. Satellites shine by reflected sunlight, so they're seen in the hours after dusk and before dawn. The orbits come from CelesTrak (free), fetched at most twice a day; the times are good to about a minute. While a scope is stacking, Nebulink also checks every few minutes whether one of these satellites will pass within 1.5° of the target in the next 20 minutes, and puts a line on the banner if so (tick A bright satellite is about to cross the scope's field in Settings › Phone alerts to get it on your phone as well). A satellite leaves a bright trail in a frame or two.

Weather

Where the forecast comes from. For a place in the US the hourly forecast comes from the US National Weather Service; anywhere else it comes from MET Norway. The line under the forecast names the source it used.

The Weather page answers "is it worth setting up tonight?" for wherever you're observing. Times are shown in the observing site's own time zone.

Weather: right now, whether tonight is worth setting up, and the next 48 hours.
Weather: right now, whether tonight is worth setting up, and the next 48 hours.

Choose the location. Use Forecast for at the top:

The Best targets page uses the same location.

CardWhat it shows
Right nowTemperature, sky, cloud cover, humidity, dew point and wind.
TonightA Good, Fair or Poor rating, astronomical darkness, the best clear window, cloud and chance of rain during darkness, the low, the strongest gust, dew risk and the Moon.
Weather mapSatellite clouds and rain radar around the place, with the place marked. Nearby, Region and Wide show about 250, 600 and 1,550 miles across; untick Clouds or Rain and storms to see one at a time, and ▶ Play the last hour shows how they're moving. The whiter a cloud, the higher and colder its top; the radar goes from blue (light rain) through green and yellow to red and purple (heavy rain and hail). The clouds come from NASA (GOES and Himawari weather satellites, about 30 minutes old) and cover the Americas, East Asia and Australia; the radar comes from NOAA and covers the US, Canada, the Caribbean, Hawaii and Guam.
Photo or InfraredPhoto (the first choice) shows NASA's real-color satellite picture (NOAA's GeoColor): the land, cloud, fog and snow as they look from space by day, and city lights with the clouds at night. It covers the Americas and runs about 1½–2 hours behind. Infrared shows the clouds as described above, about 30 minutes old, and also covers East Asia and Australia. Outside the Americas the map uses Infrared. The clouds are part of the photo, so in Photo there is no Clouds box. Nebulink remembers your choice.
Weather warningsThe National Weather Service's watches, warnings and advisories for the place (US only), such as freeze, dense fog, wind and severe thunderstorm warnings. Open Details for the full text.
Also worth knowingFor tonight's dark hours: thunderstorms, rain or snow, fog, frost and strong gusts, each with what it means for the Seestar.
Hour by hourCharts for the next 48 hours of cloud cover, temperature against dew point (when they meet, dew forms), and wind and gusts. Night is shaded. Hover for any hour's details, or open Show as a table.
Night by nightEach night of the week with its outlook, cloud, rain chance, low, dew risk, gusts and Moon.
Weather historyHow the nights have been at the place over the last 3 months to 3 years, from NASA's records: the share of clear, partly clear and cloudy nights, night lows against the dew point, and wind and rain at night, with the clearest month and the nights with high dew risk or rain. Hover for the details, or open Show as a table. NASA's cloud figures run about 3 months behind, so the newest weeks show temperature, wind and rain only.

A night is rated Good when average cloud in darkness is 25% or less with little chance of rain, Fair up to 55%, and Poor otherwise. Dew risk is High when the temperature comes within 4°F of the dew point. Press ↻ Refresh to reload; the forecast also updates itself every 20 minutes. Forecasts come from MET Norway and need internet on the PC.

Click the title of the Weather map, Hour by hour or Weather history card to fold it away, and click it again to bring it back. Nebulink remembers which ones are folded. A folded Weather map still shows the warnings line in its title, in red for a severe warning.

Star chart

The Star chart shows tonight's sky over your location, using the position your scope reports, and lets you send the scope anywhere with one click.

The star chart with your scope's field of view. Click any object to see it or send the scope there.
The star chart with your scope's field of view. Click any object to see it or send the scope there.

What's on the chart. About 5,000 stars in their true colors, constellation lines and names, the Milky Way, all 110 Messier objects and about 1,500 NGC, IC, Sharpless and other targets (the fainter ones appear as you zoom in), the planets, the Moon with its current phase, and the Sun. Targets in tonight's plan are highlighted in cyan. A green reticle and box show where your scope points and its field of view.

Look around.

Find a target. Type a name in the search box (M31, Orion Nebula, Vega, Saturn) or click any object. The panel shows its type, brightness, size, position, current altitude, rise and set times, and when it's highest tonight.

GoTo. Press GoTo & start imaging. The scope slews, plate-solves and starts stacking if stack after GoTo is on in the Seestar app; Nebulink then checks the target landed in the middle of the picture and aims again if it didn't (see Centering in Planner). Tick the light-pollution filter box for emission nebulae.

Safety limits. GoTo is blocked for targets below 15° and for the Sun. For the Moon and planets, use the Seestar app's Solar System mode, which uses suitable exposure settings.

Planner

The Planner lets you line up a night of targets and leave Nebulink to image them one after another while you sleep.

1. Choose a target. Type a name in Object name (for example M31, NGC 7000 or Orion) and pick it from the list. The search covers all 1,600 catalog objects and tonight's comets. For anything not in the catalog, open Or enter coordinates (RA and Dec) and type its position (J2000), then press Use these coordinates. Then set:

The advice panel explains the target's size compared with your field of view, when it's above 30° tonight, the best filter, a suggested imaging time, and how far it is from the Moon.

2. Check the framing. The sky map shows a survey photo with a blue box for your scope's field of view.

The box's angle. The blue box is turned the way your scope's camera will sit on the sky, and the line under the map says why. The Seestar can't turn its camera, so the angle depends on the mount mode:

↺ and ↻ still turn the box, to try out a framing; the angle chip then shows your angle, and clicking it goes back to the scope's own. Mosaic panels are laid out along the box, so with the scope's angle they match what it will really image. The dashed green box (where the scope points now) and the box on the Star chart use the same angles.

3. Add it to the plan. Press Add to plan. The button flashes ✓ Added, a green bar confirms where it went (with View plan ↓ to jump to the list), and the new row lights up. If the target is already in the plan, an amber bar asks you to press Add again before adding a second copy. Each target in the queue shows its estimated time slot and altitude. Red means it will be too low and will be skipped; outside darkness means the slot falls in twilight. Use ↑ ↓ to reorder, ✎ to change its minutes, subs (exposure) or filter right in the list (Save, or press Enter), ⌖ to reopen its framing, and ✕ to remove it.

The timeline. Under the queue, the Timeline shows the night from left to right: daylight, twilight and full darkness as bands, a red line for now, and behind each target a faint curve of its height in the sky (the dashed line is 30°). Each target is a bar; its lighter start is the time for the GoTo, plate solve and focus, and an amber bar dips below 30°. Change the plan right there:

A graph for each target, and saved plans. The plan is at the top of the Planner, and + Add a target takes you to the search below it. Each planned target shows a small graph of its height through the night, with its planned time drawn thicker, the 30° line dashed and a red line for now; under it, the highest it gets in the dark. To use a plan again on another night, press My plans, type a name and press Save. Later, Load into this plan puts its targets back into the plan for that night (on any of your Seestars), ready to check and start. ✕ deletes a saved plan.

The Planner's timeline: each target is a bar over the night's darkness and its height in the sky. Drag to change it.
The Planner's timeline: each target is a bar over the night's darkness and its height in the sky. Drag to change it.

The plan still runs as a queue from top to bottom, so dragging a bar earlier than the target before it puts it first. While a plan is running, the timeline shows its progress but can't be changed.

4. Start the plan. Choose As soon as I press Start or a start time; the time defaults to when full darkness begins. Wait for darkness if it isn't dark yet is ticked at first: untick it and the plan starts exactly when you said, even in twilight. Leave Park the scope after the last target and Stop at dawn ticked unless you have a reason not to. Press Start plan and confirm.

Mosaic (next to Filter) images a big target as 2 to 9 overlapping panels; see Projects and mosaics. Pause for clouds, then try again (ticked at first): when the scope keeps no frames for a few minutes, usually because cloud has come over, Nebulink stops stacking, waits 10 minutes and starts again on the same target, as long as its time isn't up. The queue notes how many times it paused.

Refocus when the stars get soft (ticked at first): while a target stacks, Nebulink measures the size of the stars every two minutes. When they grow 35% softer than at the start of the target, usually because the focus drifted as the night cooled, it stops the stack, lets the Seestar autofocus, and starts the same stack again, so the frames already kept stay in it. It does this at most twice per target, at least 20 minutes apart, and not in the last 11 minutes of its time. If the autofocus doesn't work, the plan carries on with the focus as it was. The queue notes how many times it refocused.

Storm guard (on by default) watches for storms while a plan runs. Every two minutes Nebulink checks the National Weather Service's warnings for the scope's place (a severe thunderstorm, tornado or similar warning) and NOAA's rain radar within about 15 miles (heavy rain) or 5 miles (steady rain); both cover the US. When one comes, Nebulink stops the stack, closes the arm, puts a red line on the banner and sends a phone alert. It carries on once there's been no storm for 20 minutes: the target is found and stacked again if its time hasn't run out, otherwise the plan moves on to the next one. Outside the US there's no warning or radar data, so storm guard has nothing to go on; Pause for clouds still works everywhere.

Battery check. Under the plan settings, a line says whether the selected Seestar's battery will last the plan: charging, enough, or about how long it lasts against how long the plan needs. Nebulink learns how fast each scope's battery goes down from its own use (whenever it runs on battery for half an hour or more) and keeps a figure for each scope, so it gets better the more you use it; until then it assumes a full battery lasts about 6 hours and says it's a rough guess. If the battery probably won't last, Start plan asks first.

Exposure check. When a target starts, the plan checks that the Seestar took the exposure you chose, and checks again about 30 and 60 seconds into the stack. If the scope is stacking a different length, the plan sets it again and restarts the stack. If the scope still keeps its own length, the target shows a note such as scope kept 10 s subs, you get an Exposure not applied warning, and the plan log records what was sent and what the scope answered. If that happens, set the exposure in the Seestar app as well.

For each target, Nebulink then:

  1. Checks the target is at least 15° up (and above your own horizon, if you drew one), and skips it if not
  2. Sets the filter and exposure
  3. Sends the GoTo; the scope plate-solves and focuses
  4. Checks the target landed in the middle of the picture, and aims again if not (see Centering below)
  5. Checks the scope's autofocus worked (see below)
  6. Stacks for your chosen time, then stops and moves on

Focus during a plan. The Seestar focuses by itself after each GoTo, and starts stacking even when that focus failed. Nebulink watches for this: when the scope's autofocus fails, it stops the stack, focuses once more and starts a fresh stack. If the second try fails too, the plan stops instead of stacking the whole target out of focus. The scope isn't parked, and you get a phone alert if alerts are on. Check the sky and the lens, focus in Live view, then press Start plan: it carries on with the same target. If you press Start autofocus in Live view while the plan is stacking, the plan waits for the focus to finish, then starts a fresh stack on the same target instead of moving on.

Centering. After each GoTo, Nebulink reads where the picture's center is from the Seestar's own plate solve (of its first stacked frames, or the one it made during the GoTo). If that's more than about 2′ from the target (2.5% of the field's short side, so 3.4′ on an S30 Pro), it stops the stack and sends the GoTo again: the scope has set its position from the plate solve, so a short GoTo lands much closer. If it lands the same way off again, the next try aims past the target by the error. After two tries it images what it has. The plan log says how far off each target landed. The same check runs after GoTo this framing now and the Star chart's GoTo, and the status bar says what happened.

Targets that keep stopping. If a stack ends by itself before its time (Stop stacking, the Seestar app on a phone, or the scope itself), the plan moves on to the next target. If that happens to two targets in a row within a few minutes of starting, something is wrong, so the plan stops instead of running through the rest and parking. The scope stays where it is; fix the cause, then press Start plan to carry on.

If a filter change or GoTo times out or isn't confirmed (a weak Wi-Fi link can drop one), Nebulink tries again up to three times. If a GoTo was accepted but the scope hasn't started stacking within 8 minutes, Nebulink stops it and runs the GoTo again (up to three tries, 4 minutes each after the first) before moving on to the next target; each try is written in the plan's activity list. If you start before it's dark and Wait for darkness is ticked, the plan waits until the sky is dark (the sun 12° below the horizon), then begins; the queue's times and the Start confirmation show when. Untick it to start right away. With Stop at dawn ticked, the plan ends when the morning sky starts to brighten (evening twilight never stops it); after the last target the scope parks.

Planning without a Seestar. You can build a plan before you've added a scope, for example on a laptop indoors. Add to plan on Best targets, the Planner and Nebulink Whiz all save to a plan kept on this PC (Whiz offers Just save it to the Planner). Start plan stays off until a Seestar is added. When you add one with Find my Seestars, the saved targets move into its plan by themselves and a notice says so. If you've added a Seestar that's just switched off, plans are saved for it as usual and start once it's on.

Watch or stop it. The status line and activity log show progress, and you can switch to other pages while it runs. Stop plan ends the current stack, keeps the frames already taken, and leaves unfinished targets in the queue. Reset finished marks every target as not yet imaged so you can run the plan again. Clear plan removes every target so you can start a new list (it asks first, and isn't available while a plan is running).

Keep the PC running. The plan runs on your PC. Keep the PC on and Nebulink open; the screen can turn off, and Nebulink stops Windows from going to sleep while a plan runs. The queue is saved, so it survives closing the app.

If Nebulink restarts during a plan. A running plan remembers which target it's on and when that target should finish. When Nebulink starts again it carries on: if the scope is still stacking that target it waits out the remaining time, if the scope has stopped it aims again and stacks for the time left, and if the target's time ran out meanwhile it moves on to the next. The plan's log says Nebulink was restarted while the plan was running. A plan you stopped yourself isn't picked up, and neither is one from a night that has already ended at dawn.

Add to calendar. 📅 Add to calendar (next to Start plan) saves tonight's plan as a calendar file that Outlook, Google Calendar and Apple Calendar open: from 30 minutes before the first target (time to set up) to the end of the last one, with each target's times in the notes and a reminder at setup time.

Live view

Live view shows what the scope sees and lets you move and focus it by hand.

All scopes. With more than one Seestar, All scopes (under At the scope) shows them all on one page: each scope's stacked picture and its newest single frame, refreshed every few seconds while the page is open. Choose how at the top, and Nebulink remembers it. Grid gives each scope a card: the stack, the live frame in a corner, and underneath the time on target and time left, the frames kept and rejected, how sharp the stars are, when the target sinks below your lowest height, and the battery, Wi-Fi, free space and dew margin. Needs you lists what needs a hand, most urgent first (a scope that's not connected, stars getting soft, frames being rejected, a low battery, little space left, a target about to set), with a button for the fix, plus a row per scope with a small chart of frames kept per 3 minutes (when it falls, it's usually cloud or dew) and the cloud forecast for the next 3 hours. Timeline lays out tonight, one lane per scope: the targets done, the one now and the ones to come; click a lane to show that scope big above. Wall shows just the stacked pictures, edge to edge, for a second screen or a star party; ⛶ Full screen fills the screen. Click a picture to open that scope's Live view.

Layouts. The Layout buttons at the top arrange Live view six ways: Control rail (the picture with the controls beside it), Cockpit (the arrows and focus on the picture), Portrait frame (a tall picture with the controls either side), Bottom dock (Move, Focus and Capture under the picture), Tabs (one tool at a time beside the picture) and Theater (the whole picture, with a toolbar and pop-ups on it). The buttons work the same in each, and Nebulink remembers your choice.

Live view zoomed in, with the corner buttons (↖ ↗ ⊙ ↙ ↘) at the top right and the move and focus controls beside it.
Live view zoomed in, with the corner buttons (↖ ↗ ⊙ ↙ ↘) at the top right and the move and focus controls beside it.

Choose a picture. Pick a source and a camera at the top of the viewer:

Map your horizon (point and mark). Open Map your horizon under the movement speed. Pick a spot, or press + New spot, name it (say “Yard – South corner”) and press Start this spot. An orange + appears in the middle of the picture. Steer the scope with the arrows until the + sits on the top of a tree or roof, let go, and press Mark here: Nebulink asks the scope where it's pointing and saves that direction and height to the spot. Work round from one side to the other; a mark every 10–15° is plenty, and where the sky is open low down, mark a point just above the ground. Marks fill in the horizon between them (up to 45° apart); directions you don't mark keep what you drew in Settings. Undo last mark takes one back, and Tidy it in Settings opens the drawing to adjust it by hand. The direction comes from the scope's own idea of where it points, so it's most accurate after a GoTo has plate-solved that night; at dusk, use the Wide-angle camera to see the treeline.

Mark with the telescope camera. The orange + is drawn on the telescope camera's picture, so choose Telescope before you start marking. The wide-angle camera doesn't work for marking: on some Seestars it sends no picture while the telescope camera is imaging, and it may need Landscape mode set in the Seestar app first. Nebulink can't change that setting.

Scan your horizon automatically. At the bottom of Map your horizon, Or scan it automatically lets the Seestar do the marking. Pick which part of the sky to scan (the whole circle, or the north, east, south or west half) and press Start the scan. The Seestar first counts the stars high up in open sky, then, every 15° round the sky, steps up or down in 5° steps to find the height where the stars appear above the trees and roofs. It takes under a minute per direction, about 20 minutes for the whole circle, and each direction is saved as soon as it's measured, so stopping part way keeps what's done. The scan replaces the picked spot's heights in the directions it scans and leaves the others alone; with no spot picked, it makes a new one called “Horizon scan” and the date. Do it on a clear, dark night, in Alt-Az mode, after one GoTo, with no stack or plan running. Clouds look like trees to the scan, so check the result in Settings and tidy any direction a cloud got in the way of. A direction marked as blocked had no stars at any height, from something tall or a cloud. While it runs, a countdown under the progress bar shows the time left, when it should finish and how long it has been going; until the first direction is done the time left is a first guess. The scan runs inside Nebulink, not in the page, so you can go to any other page while it works: a blue HORIZON SCAN banner under the header shows how far it has got on every page (Open Live view → takes you back), and Live view picks it up again when you return or reload the page. If a scan stops part way, Continue the scan carries on from the direction where it ended, with what was measured so far kept, so you don't start over.

Switching cameras: telescope and wide-angle. Every Seestar (S30, S30 Pro, S50 and S50 Pro) has two cameras: the telescope (telephoto) camera that takes your pictures, and a small wide-angle finder camera beside it. Switch between them with the Telescope and Wide-angle buttons above the Live view picture. The wide-angle camera shows a much bigger patch of sky or landscape, so it's handy for seeing where the scope is pointing, framing a landscape or finding the Moon. It never stacks, so with Wide-angle chosen Stacked is grayed out: use Single frame or Video.

When the wide-angle picture is empty. The Seestar decides when its wide-angle camera runs, and Nebulink can't change that. What to expect:

If the wide-angle camera never shows a picture even with the scope idle, send a log from the About page (Send a support ticket) right after trying it, and say which model you have.

Turn on camera (preview). When the scope isn't imaging, there's nothing to show until its camera is running. Press Turn on camera (in the viewer, or under it) for a plain live view: the camera runs, but the scope doesn't move, track a target or stack, and nothing is saved on the scope. Nebulink switches to Video by itself. Use it to frame a landscape or the Moon, check focus, or see where the scope is pointing while you move it with the arrows. Press Turn off camera when you're done. A GoTo, a plan or Start stacking takes over from it as usual. This is a preview: if the video doesn't appear on your scope, please send a log from the About page.

Move the scope. Hold an arrow to move; let go to stop. The big STOP button halts movement immediately. On the keyboard, the arrow keys move and the Space bar stops. Choose a speed from Slow (¼° per second) to Max (6° per second). Each move command only lasts one second, so the scope stops on its own if the connection drops.

Focus. The focus box shows the current focuser position. Start autofocus lets the scope focus itself on stars, which takes a minute or two. The −50, −10, +10 and +50 buttons nudge focus by hand. Pressed while the scope is stacking, it asks first, ends the stack (the frames so far are kept) and starts the focus as soon as the scope is ready; during a plan, the plan then carries on with a fresh stack on the same target.

Save photos and video. Save photo saves a full-resolution PNG, plus a 16-bit TIFF of deep-sky images for processing in programs like your stacking software or PixInsight. Record video records the video stream to MP4. Files go to your Pictures\Nebulink folder and also appear on the Album page under Saved on this PC.

Burst. On the Planets and Moon pages, ● Burst next to Save photo saves a run of pictures from the live video, one file per frame, in a folder of their own: Pictures\Nebulink\<date>_<scope>_burst-tele. Pick 25, 50, 75 or 100 from the list, or type any number from 2 to 1000. The page shows the count as it goes and ■ Stop burst ends it early. A planet is better stacked than saved as a single frame, so take a burst and stack it in the Planet stacker, AutoStakkert or PIPP.

Star party mode. Star party mode (under the viewer, and on the Overview's stacked image) fills the screen with the scope's live stacked picture for visitors, on the PC's screen or a projector. Beside it: the object's name, how far away it is and when the light you're seeing set off, its size and brightness, a few facts that change every 15 seconds, how much light the scope has collected so far, and a QR code that opens the object's Wikipedia page on a phone. It follows the scope as a plan moves from target to target. Distances and facts cover about 70 popular targets (the Messier showpieces, the bright nebulae, the Moon and planets); for others it shows the catalog name, type and brightness. Move the mouse to show the Leave star party mode button, or press Esc.

Just the picture. Press the double arrow in the picture's bottom-right corner, or tap or click the picture, to hide the name and facts so the picture fills the whole screen. It's handy on a phone: the buttons fade after a few seconds, leaving nothing but the object. Pinch to zoom in and drag to look around (on a PC, use the mouse wheel and drag); double-tap or double-click to zoom in or back out. Tap the picture again to bring the details back. Nebulink remembers the choice for next time. On an iPhone, Safari may keep its own address bar on screen.

Star party mode on a second screen. To show visitors the picture on a projector or a second screen while you keep using Nebulink on the laptop, press ⧉ On a second screen (next to Star party mode). Star party mode opens in a window of its own. The first time, the browser may ask whether Nebulink can use your screens: say yes and the window goes straight to the second screen; otherwise drag it there. Click it once (or press F11) to fill that screen. It follows the scope that was chosen when you opened it. To finish, press ✕ Close this window or Esc in that window. If nothing opens, allow pop-ups for Nebulink in the browser.

If the scope is busy. Moving or focusing while the scope is stacking asks you to confirm first. If you go ahead, the stack ends cleanly and the frames so far are kept.

Switching scopes. Use the Seestar switcher at the top of the page. If you're recording video when you switch, Nebulink stops and saves that recording first, and any arrow you're holding is released.

Terrestrial page (testing). Open Terrestrial under At the scope for daytime and landscape views: watch the scope's video, save photos, record video, run a timelapse and move the arm. Put the Seestar in Scenery (landscape) mode in the Seestar app first; Nebulink can't switch it. The page is new and has been tested on few telescopes, and some models may send no wide-angle picture. Its ? button explains each part, and Show me walks you through it.

Alignment

The Alignment page helps you level the tripod, check the mount, park the scope, and set up equatorial (EQ) mode.

Layouts. The Layout buttons at the top arrange the page six ways: Two columns (the level dial beside the mount, EQ and polar alignment cards), Polar first (polar alignment large, the rest in a column beside it), Three columns (level, polar alignment and the mount side by side on a wide screen), Step by step (one step at a time, ticked off from the scope's own readings), Summary tabs (four tiles with the latest readings; press one to open it) and Big readout (the polar error and the arrows in large type, easy to read from the scope; the other cards are under Level, mount & EQ setup). The buttons work the same in each, and Nebulink remembers your choice.

Alignment: the tripod level dial (the dot should sit in the green circle) and the mount setup.
Alignment: the tripod level dial (the dot should sit in the green circle) and the mount setup.

Level the tripod. While the page is open, the dial reads the scope's tilt sensor about once a second. The edge of the dial is 5° of tilt. Adjust the tripod legs until the dot sits in the small green circle; the dot turns green below 1°. Watch which way it moves as you adjust to learn which leg to raise. A level tripod improves GoTo and tracking accuracy, even in normal Alt-Az mode. In EQ mode the wedge tilts the scope on purpose (90° minus your latitude), so the dial checks that tilt instead: on a wedge set to your latitude it shows green, and the tripod doesn't have to be exactly level, because polar alignment measures where the scope's axis really points. The Level item in the status bar shows the same check (green, amber or red) on every page.

Mount status. Shows the mount mode (Alt-Az or EQ), whether the arm is open or folded, tracking, compass heading and location (press Change beside it to set a new location). The compass is only approximate until it's calibrated in the Seestar app.

Open and park. Open the arm raises the folded arm to level, ready for a GoTo. Park & fold the arm moves the scope to its home position and folds it down. Make sure nothing is in the way. The same controls are in the status bar as Open arm / Close arm.

EQ mode. The page shows the numbers for your location: set the wedge to your latitude (for example, 41.0° in Hazleton, Pennsylvania) and point it at true north. Switch to EQ mode stays locked until you tick the box confirming the scope is on a wedge, set to that angle, facing north, with room for the arm to swing. Switching stops imaging and swings the arm to the EQ home position.

Polar alignment (preview). Once the scope is in EQ mode, choose where to measure (overhead is usually best), press Measure polar error and confirm. The scope moves to three positions and plate-solves at each, which takes a couple of minutes; the steps are shown as it goes, with the telescope's live video (or its latest frame, if there's no video). The result is the total error and which way to move the wedge, like the Seestar app: ⬆ Up or ⬇ Down with the altitude knob, and ⬅ Left or ➡ Right with the azimuth knobs, as seen standing behind the scope facing the pole. The dot shows the same thing: move the wedge to bring it into the green circle, under 5′. If moving the way an arrow says makes that number grow, press Flip up/down or Flip left/right; Nebulink remembers it.

Nebulink shows only its own measurements. A polar alignment done in the Seestar app (or NINA's three-point polar alignment) isn't read by Nebulink, so the card keeps showing Nebulink's last result, with the time it was measured, until you measure again. You don't need Nebulink's polar alignment if you already align another way.

Press Live adjust. The scope doesn't measure on its own: turn a knob a little, let go of the wedge, then press Next measurement to take a reading. Each reading starts 5 seconds after you press it, so the wedge can be left alone. The status line says when a reading is being solved, when the next one starts, and when the last result came in; wait for it to say Ready before you judge a change, because a change made during a solve counts in the next reading. Tick Repeat readings automatically to have readings repeat every 5 seconds instead. For one reading at the current position, without moving the arm, press Measure here. Each reading shows whether the error went down (better) or up (worse: turn the other way). Press Stop when you are done. Under 15′ is good for the Seestar; under 5′ is excellent. The dial is hidden by default; press Show dial to see it. This is a preview: please send a log from the About page if anything looks wrong.

Stacking

The Stacking page is where you choose the filter, start and stop live stacking, and watch the picture build.

Layouts. The Layout buttons at the top arrange the page six ways: Side column (the cards in a column beside the picture), Portrait frame (the Seestar's tall picture in the middle, the cards either side), Picture on top (a wide picture with the cards under it), Dashboard (tiles with the frame count, integration, star size, filter, darks and target across the top; press one to go to its card), Tabs (one card at a time beside the picture) and Theater (the picture fills the window, with Save and Refresh on it and the cards in pop-ups). The buttons work the same in each, and Nebulink remembers your choice.

Stacking: the live stack with its frame count, and the filter and stacking controls.
Stacking: the live stack with its frame count, and the filter and stacking controls.

Filter. Press IR-cut or LP filter; the one in use is highlighted.

FilterBest for
IR-cutGalaxies, star clusters and reflection nebulae (natural color)
LP (Hα + OIII)Emission nebulae and supernova remnants; also cuts light pollution

Nebulink looks up your current target, recommends a filter, and warns you if the other one is in place.

Live stacking. Shows the stack's state, frames accepted and rejected, total exposure time, and a progress bar for the current exposure.

Zoom in to check star shapes. Live view and the Stacking page's picture can be zoomed: scroll the mouse wheel over the picture, double-click a spot (double-click again to see the whole picture), or use the buttons at the top right: − and +, Fit (the whole picture) and 1:1 (one camera pixel per screen pixel). Drag to move around. ↖ ↗ ⊙ ↙ ↘ jump straight to a corner or the center, so you can compare stars across the frame: stretched stars in one corner only point to tilt, all the corners stretched outward to coma or field rotation, and every star stretched the same way to tracking or wind. The small map at the bottom right shows which part you're looking at. Zoomed in, Nebulink fetches the part on screen at the camera's full resolution, so the detail is sharper than the page's copy of the picture; the zoom stays where it is as new pictures arrive. Video can be zoomed too, at the video's own resolution.

Live stack result. A large view of the stacked picture, updated as each new frame is stacked, labeled with the target, frame count and total time. Nebulink fetches each new picture in the background as soon as the scope reports another frame, so it's ready when you look. When stacking stops, the last picture stays on screen. Save stack writes a PNG to your Pictures\Nebulink folder, plus a 16-bit TIFF when the picture setting below is Full quality.

Stacked picture from the scope. Under the picture, choose how the scope sends it:

This is a setting on the Seestar itself, so the Seestar app sees the same choice. The stacks the scope saves to its own storage are full quality either way.

Current target. Name, type, coordinates, current altitude and time on target, with a shortcut to the Star chart to pick something new.

Focus and dew watch. While the Seestar stacks, Nebulink measures the size of the stars in the picture every two minutes. The first few measurements set the starting size for the target; the line on the chart shows it, and the dashed line marks 35% bigger. If the stars stay more than 35% bigger for two measurements in a row, the card turns amber, the banner at the top of the page tells you, and a phone alert is sent if you've ticked Stars getting soft in Settings. Usually the focus has drifted as the night cooled: press Start autofocus. If the dew heater is off and the night is damp, dew on the lens is more likely: press Turn on the dew heater and give it 10 to 15 minutes. After an autofocus the watch measures the new starting size. When cloud hides the stars it waits, rather than warning you.

Dark library. A dark frame is taken with the shutter closed: it records the sensor's own noise, hot pixels and glow, which the Seestar then subtracts from every frame of a stack. Seestar firmware (Seestar app 3.4.0 and later) keeps a library of master darks on the scope and, while it stacks, picks the one that best fits each frame's exposure and temperature, so the more temperatures the library has, the cleaner the pictures. The Dark library card on the Stacking page shows the exposure the Seestar stacks with and its temperature now, and whether the library already has a close match (within 3 °C, about 5 °F). Build darks now asks the Seestar to build darks: it closes its dark filter and works by itself for a few minutes, and can't image meanwhile, so stop imaging first. If the Seestar's camera is still on from the last target (after Stop imaging it keeps taking preview pictures) or from Live view, Nebulink turns it off first, because the Seestar won't build darks while it's on; nothing moves. While it works, a blue BUILDING DARKS banner shows under the header on every page. Stop ends it early. Tick Build darks when a plan finishes and, at the end of each plan, the Seestar builds darks at that night's temperature before it parks. The table shows the builds Nebulink has seen, by exposure and temperature: the ones you started and the ones the Seestar does by itself before a stack; the outlined square is tonight. Nebulink uses the temperature the Seestar reports for itself (the one in the status bar), while the Seestar matches on its sensor's temperature, so take the table as a guide. Copy masterdarks to this PC looks for them in the Seestar's shared folder and copies them to Pictures\Nebulink\Dark library, for your own processing; if it can't find them there, save them from the Seestar app (Me → Device management → Sensor calibration → Dark library). Never delete masterdarks on the Seestar: it needs them.

Taking darks any time, without a plan. Darks don't need a target, an imaging session or a plan. Open the Stacking page, scroll to the Dark library card and press Build darks now whenever the Seestar is idle. If it is imaging or running a plan, press Stop imaging first. It takes a few minutes, and a BUILDING DARKS banner shows the progress on every page.

When Build darks now is grayed out. The Seestar can't build darks while a plan is running on it, while it's stacking or while it's busy with something else, so Build darks now is grayed out then and the reason shows under it. Tick Build darks when a plan finishes to build them after the plan, or stop the plan first.

Album

The Album lets you browse, preview and download your pictures, and copy them to this PC to free up space on the Seestar. Nothing on the scope is changed or deleted unless you ask for it with Copy to PC (below). Small pictures load several at a time, and every picture you've looked at is kept on this PC, so it opens at once next time, even after a restart. The first look at a new night's folder still has to come over Wi-Fi, so it's quickest with the scope close to your router.

The Album with two folders selected and the Copy to PC window, with the option to delete them from the Seestar afterwards.
The Album with two folders selected and the Copy to PC window, with the option to delete them from the Seestar afterwards.

Folders load quickly the second time. Nebulink remembers each folder's list for two minutes, so going back up, opening a folder again or switching scopes and back is instant. Load images always fetches a fresh list. If a scope answers slowly, the Album says it's still waiting for that scope's Wi-Fi.

On the Seestar. Press Load images. Nebulink opens the scope's shared folder (normally \\<scope address>\EMMC Images\MyWorks) and lists your target folders, newest first. Each target usually has two folders: one with the stacked results and one ending in _sub with the individual frames.

FITS files are previewed too: Nebulink converts and brightens them so you can check individual frames without other software. Videos can be downloaded but not previewed.

Labels. In the picture viewer, Labels names what's in a stacked picture: galaxies (yellow), nebulae (pink), clusters (blue) and named bright stars, with dashed outlines for the bigger objects and arrows for north and east. Nebulink works out exactly where the picture is on the sky by matching the stars in it to the Gaia star catalog, which it fetches for that part of the sky from the free CDS VizieR service the first time and then keeps on this PC. This takes a few seconds, and the line under the picture then says how many stars matched, the field size and which way is north. It works for pictures named after a catalog object (as the Seestar names its stacks, M 31, NGC 7000, Sh2-155…) with sharp stars; clouds, very short stacks or a picture of somewhere else can stop it. Save with labels saves a copy of the picture with the labels drawn on it.

Copying to this PC and freeing up space. The Seestar's built-in storage fills up quickly; the line under the tools shows how much is free. Press Select, then click pictures or whole folders to pick them (Select all on this page picks everything shown; you can pick in several folders before copying). Press Copy to PC…, choose the folder to copy into (at first Pictures\Nebulink\From <scope name>; Browse… opens Windows' folder window) and press Copy. Folders are copied with everything in them, keeping their names. A bar shows the progress and Stop stops it; files already copied stay on the PC, and running the same copy again skips them. To free up space, tick Then delete them from the Seestar and confirm. Each file is deleted only after it has been copied and its size checked; files that didn't copy are kept, and so are files written in the last 10 minutes while the scope is imaging. Folders left empty are removed. Deleting can't be undone, so keep the copies safe. Copying a large folder over Wi-Fi takes a while (a few MB a second is usual); keep the PC awake and Nebulink open until it finishes.

Copy everything new. ⬇ Copy everything new copies every folder on the Seestar to this PC in one go, with nothing to select. Files already on this PC are skipped, so after the first time only the new pictures are copied. In its window you can also tick Also do this by itself after each plan finishes: when a plan ends, Nebulink parks the scope as usual, copies the new pictures, and only then powers the scope down if the plan says so. The automatic copy never deletes anything from the Seestar. The Album shows when it's switched on, with Turn off.

Saved on this PC. This tab shows the photos and videos you saved from Live view and Stacking, and the pictures you copied from the Seestar (in their From <scope name> folder). Folder picks which folder on this PC it shows: Pictures › Nebulink, and every other folder you've copied pictures into with Copy to PC, which is added to the list by itself. Choose a folder… opens Windows' folder window to show any other folder (or type its address), and Remove from the list takes a folder out of the list without deleting anything. When a copy finishes, Show them opens this tab at the folder the pictures went to.

Signing in. The Seestar shares its files with the user name Guest and no password. Nebulink connects to the scope and signs in as Guest by itself, so there's no password box and nothing to change in Windows. In the rare case that this direct connection doesn't work, Nebulink tries Windows' own file sharing instead; if Windows blocks guest access there, the Album says so and the manual's Troubleshooting section gives the PowerShell steps to allow it yourself.

Setting the folder by hand. If Nebulink can't find the scope's files, open Folder under the buttons, paste the folder path, and press Use this folder. Find automatically searches again.

Enhance

Enhance turns a picture from the Album into one that's ready to share, without other software. Open any stacked FITS, JPEG or PNG and press ✨ Enhance at the top of the preview. Nebulink works on the full picture, so a FITS file gives the best result: it still holds all the faint detail the Seestar captured.

Enhance side by side, with Star reduction and the File type (here TIFF 16-bit).
Enhance side by side, with Star reduction and the File type (here TIFF 16-bit).

Auto. Nebulink starts with settings picked for that picture: it removes the light-pollution gradient, makes the sky background neutral gray, balances the stars to white, brings up the faint signal and smooths the noise. ✨ Auto puts these settings back at any time; Undo all switches every step off.

AI processing. The AI processing section uses GraXpert, a free astrophotography program, to remove gradients, remove noise and sharpen (deconvolution) with artificial intelligence. GraXpert isn't part of Nebulink: install it yourself from graxpert.com (its AI is free for personal use). Nebulink finds it where programs are installed (Program Files); a copy in Downloads, on the Desktop or in Documents is filled in for you, so press Find GraXpert to use it; otherwise type where GraXpert.exe is and press Find GraXpert. Tick the steps you want, set the noise removal strength and press Process with AI. GraXpert works on the full picture in the background, which can take a few minutes on a PC without a graphics card; the first time, it downloads its AI models, so the PC needs internet. When it's done, the result replaces the picture you're editing: the gradient, noise and sharpen sliders are turned down because the AI has done that work, and every other slider and the crop work as usual. Original still shows the picture before AI. Undo AI goes back to it. Sharpening needs GraXpert 3.1 or later. Without GraXpert, Built-in clean-up turns up Nebulink's own gradient removal, noise reduction and sharpening instead (no AI).

Other programs for AI processing (experimental). Under AI processing, Program chooses what does the work. GraXpert is the first choice. Siril (free, siril.org) removes gradients with its background extraction, removes noise and sharpens with Richardson-Lucy deconvolution; Nebulink finds it in Program Files, or you enter where siril-cli.exe is. Cosmic Clarity (free, from Seti Astro) removes noise and sharpens with its own AI; it doesn't remove gradients. Unzip it into a folder of your own, such as Documents, and enter that folder. Nebulink puts the picture in its input folder for a moment and takes the result back, so keep that folder empty. Your own program… runs any program that works from a command line and saves a FITS picture: choose its .exe and type a command line for each step, with {input}, {output} and, if you like, {strength} (the noise strength, from 0 to 1). It can only be set up on the PC itself. Programs that only run inside PixInsight, such as BlurXTerminator and NoiseXTerminator, can't be used this way.

Satellite trails. When a picture opens, Nebulink looks for the straight streaks satellites and planes leave and takes them out: under Satellite trails it lists each one it found, and while Show where they are is ticked, each is marked on the picture with a dashed yellow line and its number. Untick a trail to put it back (for example a straight edge that isn't a trail). If it missed one, press ✎ Mark a trail and click both ends of it on the picture: Nebulink moves the line onto the streak if it's within a few pixels, and takes it out too (✕ removes a trail you marked; Esc stops marking). A trail is taken out by measuring, step by step along it, how much brighter it is than the sky right beside it and subtracting only that, so the stars and nebula it crosses keep their own light. It's done first, on the full picture, before every other step, and the saved picture is free of it too. Original shows the picture with its trails. A trail is followed across a bright galaxy or nebula even where it's hard to see. Look again searches once more (trails you marked stay) and Undo all unticks every trail. Very faint trails can be missed: mark those by hand. This isn't AI and doesn't need GraXpert.

Compare. Original, Side by side and Enhanced switch the view. In Side by side, drag the line across the picture.

Crop. In the Crop section, pick a shape: Free, Original shape, Square 1:1, 4:3, 3:2, 16:9 (wide), 4:5 (portrait) or 9:16 (phone). A box appears over the picture with the area outside it dimmed and a rule-of-thirds grid. Drag the box to move it, or drag a corner to resize it; it keeps the chosen shape, and the size in pixels shows below. Press ✓ Done and the preview shows just the cropped area. ✂ Change crop reopens the box and Remove crop goes back to the whole picture. Gradient removal and color balance are still worked out on the whole picture, so a tight crop doesn't throw them off. ✨ Auto keeps your crop; Undo all removes it. The saved JPEG is cropped at full resolution. ✨ Auto-crop scans the picture's edges for empty black strips, noisy fringes and uneven brightness left by dithering, field rotation or the edge of the stack, crops them off, and says what it found. Adjust it with Change crop or undo it with Remove crop.

Saving. Choose the File type: JPEG (small, for sharing), PNG or TIFF, each in 8-bit or 16-bit. 16-bit keeps far more tones, which matters if you go on editing the picture in another program; TIFF 16-bit is the usual choice for that. The File name starts as the original's name with _enhanced on the end; change it if you like. Save puts a full-size copy in your Pictures\Nebulink folder (it never replaces a file: a number is added instead), where JPEG and PNG copies also appear in the Album under Saved on this PC. Save as… opens Windows' own Save as window to pick the folder, name and type; after that, Save uses the same folder until Nebulink is closed. Your original file, on the Seestar or this PC, is never changed.

Share picture. Saves the enhanced picture (about 1400 pixels across, as shown) with a dark caption strip along the bottom: the target and its name, frames × exposure, total time, filter, date and the scope. It goes to your Downloads folder as a JPEG, ready for social media or a forum.

Please note. Enhance is a quick way to get a picture you can share straight from the Album. It doesn't replace dedicated astrophotography software such as PixInsight or AstroWizard, which give you far more control. Results depend on your data, your sky and your settings, and we can't guarantee that any picture will come out perfectly. Your original files are never changed, so you can always process them elsewhere. PixInsight, AstroWizard and GraXpert belong to their respective owners; Nebulink isn't affiliated with them.

Analytics

The Analytics page (under After) is your imaging history: every night Nebulink ran a plan, and every stacked picture in your Seestar's album. Pick All scopes or one scope, and the time range (30 days, 90 days, 12 months or All time) at the top; everything on the page follows that choice.

Analytics: imaging time, targets finished, frames stacked and pictures, night by night.
Analytics: imaging time, targets finished, frames stacked and pictures, night by night.

Where the history comes from. Nebulink reads its own log for each night a plan ran, and keeps what it finds in history.json in its data folder, so nights stay in your history after the log has moved on. Nights before you started using Nebulink's plans aren't in it, but the Seestar's album is: Nebulink reads the album's file names (they include the target, the number of frames, the exposure, the filter and the date) when the scope is on and connected, at most every 10 minutes; Read it again at the top reads it now. Everything stays on this PC.

Projects and mosaics

Projects. A faint target often needs many hours, more than one night gives. Make it a project: on the Analytics page, under Projects, type the target and the hours you want (or press + Project next to a target in Your targets), then Add project. Nebulink adds up the imaging time on that target from every night since, across all your scopes, and shows a bar toward the goal. Plan tonight frames it in the Planner; Mark finished puts it away when you're happy (Carry on brings it back). Nebulink Whiz puts unfinished projects that are up tonight at the top of its picks, marked ★ Project.

Mosaics. Some targets are bigger than the Seestar's view: the Andromeda Galaxy, the Veil, the North America Nebula. In the Planner, choose a Mosaic size (2×1 up to 3×3) before you add the target. The framing on the photo shows each numbered panel, overlapping a little, and the Planner's advice suggests a size when a target won't fit. During the plan, Nebulink images the panels one after the other, sharing the target's minutes between them, and each panel is its own stacked picture in the Album. Join them afterwards in the Album with Join them into one picture… (see below), or in another program such as Siril, Microsoft ICE or Photoshop.

Panel overlap. Overlap (next to Mosaic, and on Milkyway Whiz) sets how much neighboring panels overlap: 20% at first, up to 40%. The Seestar moves a little between frames (dithering), so each stacked panel has a ragged strip along its edges that you crop away. With more overlap there's still plenty left to join after cropping. Each panel then covers a little less new sky, so a big target may need one more panel. The choice is remembered.

Joining the panels (experimental). When the Album shows the folders of a mosaic's panels ("M 31 panel 1 of 4" and so on), a bar above them offers Join them into one picture…. Or press ☐ Select, pick the panel folders (or their stacked pictures) and press 🧩 Join as a mosaic…. Nebulink lines the panels up by their stars where they overlap (allowing for the small turn between the panels of an Alt-Az mosaic), evens out their brightness and sky glow so the joins don't show, and blends them into one picture. Trim the ragged edges cuts it to a neat rectangle. The result (a 32-bit FITS you can open in Enhance, a JPEG and a short report) goes into Pictures\Nebulink\Mosaics. It works best with the stacked FITS the Seestar saves for each panel. The panels need to overlap a little, and the overlaps need some stars; Nebulink's own mosaics are made that way. Joining is new and still experimental: when it finishes, Nebulink asks whether it came out right, and your answer (with a small copy of the picture and the join's report, if you leave that ticked) goes to Paul so he can make it better.

Turn the result (in the join's window): Auto turns a tall result on its side so the long side goes across; North up turns it so north is up and east is left, using each panel's position saved in its FITS file (with only two panels, or a single row, Nebulink can't tell a mirror image and keeps the picture's own); or a quarter turn of your choice. Under the result, Where each panel went shows each panel's outline and number. Nebulink matches each panel's brightness with one change for all its colors (the colors may differ by at most 20%, so no panel gets a tint), and a panel stacked from far fewer frames counts for less where panels overlap. When a panel is too faint to match (more than 8 times), the finished message says so and Details explains why.

Where each panel was. After each panel is centered, Nebulink writes its center (RA and Dec, J2000, plate-solved when the scope solved it, otherwise as planned) to the plan log and to a small CSV file in the Mosaic panels folder next to your photos, named after the night and the target. It lists each panel's planned and solved position and how far off target it was, so ASTAP, Siril or your stitching program can place the panels.

Settings: alerts, phone, horizon, backup

Click ⚙ Settings in the page list.

Customize. Customize, under Help and settings in the page list, chooses what you see. Pick a page on the left. Show this page in the menu takes it out of the page list (it still opens from a link, and nothing in it is lost), and the switches on the right hide parts of that page, such as Sky today on the Overview or The past on the Weather page. A page with hidden parts says so at the top, with a link back to Customize. Show everything again undoes it all. Settings, the Manual and About always stay in the menu. The choices are kept in the browser you make them in, so a phone or tablet can have its own.

Nebulink Helper

The ✦ Ask Nebulink button in the bottom-right corner of every page opens the Helper. Type a question or press one of the suggestions. The Helper works offline: it answers from this manual, your scopes and Nebulink's log on this PC, and nothing you type or say is sent anywhere.

Ask out loud. Press 🎤 next to Ask and say your question, for example Turn on the dew heater or What should I shoot tonight? The button glows red while it listens and stops by itself when you pause (or press it again to stop). A moment later your question appears and the Helper answers it as if you had typed it. The speech is turned into text by a small speech model that comes with Nebulink and runs on this PC, so it works without internet, and the recording is thrown away straight after. The first time, the browser asks whether Nebulink may use the microphone: choose Allow. If it doesn't hear you, check the microphone is chosen in Windows (Settings > System > Sound > Input) and that Settings > Privacy & security > Microphone lets desktop apps use it. It understands English; catalog names work as you'd say them (M thirty one, NGC seven thousand).

Read answers aloud. Press 🔈 at the top of the Helper to have answers spoken with Windows' own voice (it turns to 🔊); press it again to stop. Handy at the scope with the laptop out of reach. Nebulink remembers the choice.

Ask Nebulink after Check my setup: each problem it finds, with what to do about it.
Ask Nebulink after Check my setup: each problem it finds, with what to do about it.

Name a scope (S30, S50 Pro) to ask about that one; otherwise the Helper uses the scope chosen at the top of the page. The Helper answers in English.

Voice commands

Open ✦ Ask Nebulink, press 🎤 and say one of these (or type it; typing works the same). The speech is recognized on this PC, with no internet, and in English only. Add a scope's name to any of them (…on the S30, …on the S50 Pro); otherwise the command is for the scope chosen at the top of the page. Anything that moves or changes a scope asks you to press Do it first. Press 🔈 at the top of the Helper to hear the answers (see Nebulink Helper).

Control the scope

Move around

Shortcuts

Quick questions

Anything else is answered from this manual or by checking your setup: How do I polar align?, Why is there no picture?, Check my setup. Catalog names work as you'd say them (M thirty one, NGC seven thousand).

Planets

The Planets page (under At the scope, next to Moon) is for Mercury, Venus, Mars, Jupiter, Saturn, Uranus and Neptune:

Moon photography

The Moon page (under At the scope) is for lunar pictures:

AI processing on a lunar picture is done in Enhance, as for any picture, so the original picture is kept as it was made.

Not yet tested on a real Seestar: the crater GoTo direction and offset, autofocus and zoom in Live view, the prompt when a plan is running, and the Moon above the horizon in the sky chart.

Troubleshooting

The Troubleshoot page. Click Troubleshoot near the bottom of the page list. Nothing on it moves the scope.

Troubleshoot: the check-up of your Seestar, with a fix for each problem.
Troubleshoot: the check-up of your Seestar, with a fix for each problem.
Last night, explained: the night target by target, with what to do about anything that went wrong.
Last night, explained: the night target by target, with what to do about anything that went wrong.

Most problems come down to the network, the connection key, or the Seestar app holding the scope. Start with the row that matches what you see.

The log. Nebulink keeps a log of what it does and of any errors, with the time of each. It's in %LOCALAPPDATA%\Nebulink\logs (paste that into File Explorer's address bar). It holds the last five files of about 1 MB each and stays on your PC. License keys and the Seestar connection key are never written to it. When something goes wrong, press ✉ Get help at the top of any page (or Send a support ticket on the About page). Choose what it's about, add your email, give it a short title, write what happened and roughly when, add a screenshot if you like (Windows + Shift + S, then Ctrl + V), and press Send ticket: it goes straight to Nebulink's developer with the log, and you get a ticket number. Your tickets are listed on the About page. (It needs internet on the PC; passwords and keys are removed first.) Save log for support instead saves the same zip file to your Downloads folder, with the logs and a short summary of your Nebulink version and scopes, for you to email. For a hard-to-catch problem, tick Detailed logging on the About page first: Nebulink then also records every command it sends to your Seestars and their replies, the scopes' own messages and what the pages ask for, in a separate file (nebulink-detail.log, up to about 30 MB). Make the problem happen again, then save the log. Detailed logging switches itself off after 24 hours.

Suggest a feature. Have an idea for Nebulink? Press 💡 Suggest at the top of any page. Pick what it's about, press Next: describe it, say it in a few words, what it would help you do and how much you'd use it, and add your email if you'd like to hear when it's in. Press Send idea: it goes to Nebulink's developer with only your Nebulink version and your Seestars' models and firmware, never the log, and it's listed under Your ideas on the About page.

Your ideas. The About page lists the ideas sent from this PC and what Paul decided about each: Sent to Paul, Paul has read it, Planned, In version … once it's out, or Not for now, sometimes with a short note. Nebulink asks for news when you open the About page; Check now asks straight away. Only the ideas' numbers are sent to ask.

What you seeWhat to do
Status bar says UnreachableCheck the scope is on and in Station Mode. Its address may have changed: press Find my Seestars on the Overview page to find it again. Close the Seestar app on your phone.
The Seestar keeps saying "Please update to the latest version"The scope is answering an app that hasn't signed in with ZWO's connection key. Set up the key (Installation step 3) with the newest Seestar APK. Until the key is set up, Nebulink stops contacting a scope that asks for it, so the scope goes quiet; it carries on by itself once the key is in place. If it still talks, press Quit Nebulink and check that no other PC or older app is connected to it.
The scope shows status but ignores commandsThe connection key is missing or doesn't match the firmware. Repeat step 3 of Installation with the newest Seestar APK.
Find my Seestars finds nothingCheck the scope is on and joined to the same Wi-Fi as the PC (Station mode in the Seestar app), and that you allowed Python through Windows Firewall. Guest networks and some mesh routers keep devices apart; if so, type the address under Or type its address.
A scope shows up but its name is just "Seestar"The connection key isn't set up yet, so the scope can't say what model it is. You can still add it; set up the key (Installation step 3) to control it.
The browser can't connect to 127.0.0.1:8050Nebulink isn't running. Start it again from PowerShell and keep that window open.
"seestarpy isn't installed" or "Live view needs OpenCV"Run pip install seestarpy opencv-python numpy pysmb, then restart Nebulink.
No weather or sky photosThe PC needs internet for these. Press refresh on the Weather page or the Conditions card. Best targets still ranks targets without a forecast.
Live view says No video or The camera is offThe Seestar only streams video while its camera is running. Press Turn on camera, or GoTo a target. If the camera is on and there's still no video after half a minute, use Stacked or Single frame and send a log from the About page.
No stacked image yetThe scope isn't stacking, or hasn't stacked its first frame yet (that takes about one exposure). Start a stack, or switch to Single frame.
The stacked picture takes a long time to appearOn the Stacking page, set Stacked picture from the scope to Fast. If it's still slow, the scope's Wi-Fi signal is probably weak: move the scope or the router closer.
A scope keeps dropping its connectionIts Wi-Fi signal is probably weak where it sits. Move it or the router closer, or press ⟳ Reboot in the status bar.
A new button or setting doesn't appear after an updateThe browser tab still shows the old page. Press Reload now on the banner at the top, or press Ctrl + F5.
Location in the status bar is wrongClick it and set the right location (see Setting the scope's location). Target heights, darkness times and plans all use it.
GoTo button is grayed outThe target is below 15°, or it's the Sun, Moon or a planet. The message under the button says which.
A plan target was skippedIt was too low when its turn came. Move it later in the queue or pick a higher target.
Add to plan seems to do nothingLook for the green bar under the button (Added … as number 3) and press View plan ↓: the list is further down the page. An amber bar means the target is already in the plan; press Add again to add a second copy. The button is grayed out while a plan is running.
Comets says it couldn't download the listThe PC needs internet once to download the comet list from the Minor Planet Center; after that Nebulink keeps a copy (comets.txt) and refreshes it every two days when online. An empty Comets list is normal when no comet is brighter than magnitude 13.
Whiz finds no targetsGo back to Interests and tick more kinds of targets, or untick Famous showpieces only. A short window (until bedtime) or a night with no full darkness also leaves fewer choices.
Whiz says a plan is runningStop the running or waiting plan on the Planner page, then press the Whiz's button again.
Album can't find the filesPress Find automatically; Nebulink signs in as Guest by itself. If the message mentions pip install pysmb, run that command and restart Nebulink. If the message says Windows is blocking guest access, follow the next row. (File Explorer itself uses the user name Guest with no password.)
Allow Windows guest access yourselfNebulink doesn't change this setting for you. Open PowerShell as administrator and run Set-SmbClientConfiguration -EnableInsecureGuestLogons $true -Force and Set-SmbClientConfiguration -RequireSecuritySignature $false -Force, then press Find automatically again. This lowers protection for every network folder on this PC, so only do it on a network you trust, like your home Wi-Fi. The row below undoes it.
Undo the Windows guest-access changeOpen PowerShell as administrator and run Set-SmbClientConfiguration -EnableInsecureGuestLogons $false -Force and Set-SmbClientConfiguration -RequireSecuritySignature $true -Force. Nebulink's own Guest connection keeps working either way.
The interface is too bright at nightPress Night mode in the header.

Safety, credits and copyright

Safety

Credits. Nebulink uses seestarpy for the telescope connection, star and constellation data from d3-celestial © Olaf Frohn (BSD license), deep-sky positions and sizes from OpenNGC © Mattia Verga (CC BY-SA 4.0) and the Stellarium deep-sky catalog, DSS2 sky survey images via the CDS hips2fits service, star positions for labeling pictures from ESA's Gaia DR3 catalog via the CDS VizieR service, satellite orbits from CelesTrak and the SGP4 orbit code from python-sgp4 by Brandon Rhodes (MIT license), comet orbits from the IAU Minor Planet Center, planet and Moon pictures rendered from maps by NASA/JPL-Caltech (Mars), James Hastings-Trew (Jupiter, from Cassini data), Oleg Pluton (Mercury, Venus, Saturn, Uranus and Neptune; CC BY 4.0) and Ruslan Kabatsayev (Moon, from NASA LRO data; CC BY-SA 4.0) via the Stellarium project, weather forecasts from MET Norway (data from MET Norway, CC BY 4.0, converted by Nebulink to °F, mph and an hourly layout), place names from GeoNames (geonames.org, CC BY 4.0), town names from GeoNames (geonames.org, CC BY 4.0), and OpenCV and NumPy for image processing.

Weather history: NASA Langley Research Center (LaRC) POWER Project, funded through the NASA Earth Science/Applied Science Program (power.larc.nasa.gov, CC BY 4.0).

Trademarks. Seestar and ZWO are trademarks of Suzhou ZWO Co., Ltd. Nebulink is an independent product and isn't affiliated with or endorsed by ZWO.

Contact. Paul R. Smaglik · support@getnebulink.com · getnebulink.com

Community. Show your pictures, swap tips and tell Paul what Nebulink should do next on the Nebulink Discord server. Post only your own pictures, and keep your location and Wi-Fi details out of anything you share, including log files (send those to support instead).

© 2026 Paul R. Smaglik. All rights reserved.